Rubber Flooring Roll - Gym Installation Guide

Proper installation of your Gorila Fitness Rubber Flooring ensures durability, a seamless look, and optimal performance. Whether you’re using double-sided tape for a semi-permanent setup or adhesive for a permanent bond, this guide provides professional tips for a successful installation.


1. Preparation

Before starting, gather these tools:

  • Utility knife
  • Straight edge or T-square for precise cuts
  • Measuring tape
  • Chalk line or masking tape (optional for alignment)
  • Double-sided tape or adhesive
  • 1/4” notched trowel (for adhesive)

Important: Place the rolls flat in the installation room at least 48 hours before installation. This allows the material to acclimate, minimizing expansion or contraction. Ideal temperature: 15°C - 25°C (59°F - 77°F).


2. Inspecting the Roll and Preparing for Final Fit

Each roll has a grain direction—make sure all rolls align in the same direction for a consistent appearance. Note: Roll lengths can vary slightly. To achieve a precise fit, you may need to trim up to 1 inch from the ends. Use a straight edge and utility knife for clean cuts.


3. Step-by-Step Installation

Step 1: Measure and Plan

  1. Measure the installation area and add 5-10% extra for adjustments.
  2. Use chalk lines or masking tape to mark guidelines on the floor for alignment.

Step 2: Cutting the Roll

  1. Cut each roll to the needed length, using a utility knife and straight edge. Follow the grain for a clean finish.
  2. Cut slightly longer than required, then make final trims once each roll is in position.

4. Choosing Your Installation Method


Option A: Double-Sided Tape Installation (Semi-Permanent)

  1. Apply Initial Tape and Secure: Roll back the mat slightly and apply double-sided tape along the first 2-3 feet to anchor it. Use weights, like bumper plates or kettlebells, to ensure the tape adheres fully.

  2. Continue in Sections: Work in 4-10 foot sections, depending on your comfort level. Unroll and apply tape along the edges, pressing down and adding weights as you go to keep it secure.

  3. Align and Position: Place each roll edge snugly against the adjacent roll without pressing too tightly. This helps prevent lifting without forcing the edges together. Keep each edge square for a consistent, professional look.

Note: Double-sided tape allows for easier repositioning but is best suited for semi-permanent setups or areas with lighter traffic.


Option B: Adhesive Installation (Permanent)

  1. Apply Initial Adhesive and Secure: Roll back the mat partially and spread adhesive over the first 2-3 feet using a 1/4" notched trowel (or the size recommended by the adhesive manufacturer). Apply the adhesive at a 45-degree angle to ensure even ridges, then firmly press down the roll and secure with weights like bumper plates or kettlebells.

  2. Continue in Sections: Apply adhesive in 4-10 foot sections based on your comfort level. As you unroll, press down and add weights to hold each section in place, ensuring a solid bond as you go.

  3. Align and Position: Place each roll edge snugly against the adjacent roll without pressing too tightly. Just press enough to prevent lifting. Check that each roll edge is square for a seamless connection with the next roll.

Note: Adhesive installation provides a durable, long-lasting bond ideal for high-traffic or heavy-use areas.


5. Final Adjustments and Testing

  • Inspect all seams and edges to ensure tight connections with no visible gaps.
  • Walk across the floor, checking for any uneven areas or air pockets, and make final trims as needed around walls or obstacles.

6. Professional Installation Available

For a flawless installation, consider our certified installation services available across Canada. Our professionals ensure your flooring is installed to the highest standards, maximizing durability and performance.

For more details and a precise shipping quote, please contact info@gorilafitness.ca.


By following these steps, you’ll achieve a clean, professional finish for your rubber flooring. Don’t hesitate to reach out for any additional questions!